Reference Guide

upgrade system
Upgrade the bootflash image or system image.
Syntax
upgrade system {flash: | ftp: | scp: | tftp: | usbflash: |
stack-unit {0-5 | all} {A: | B:}
Parameters
0–5 Enter the keyword 0–5 to upgrade only the mentioned
stack-unit.
all Enter the keyword all to upgrade all the member units of
the stack.
ftp After entering the keyword ftp you can either follow it with
the location of the source file in this form://
userid:password@hostip/filepath
, or press Enter to
launch a prompt sequence.
scp After entering the keyword scp you can either follow it with
the location of the source file in this form://
userid:password@hostip/filepath
, or press Enter to
launch a prompt sequence.
tftp After entering the keyword tftp you can either follow it with
the location of the source file in this form://
hostlocation/filepath, or press Enter to launch a
prompt sequence.
flash After entering the keyword flash you can either follow it
with the location of the source file in this form://filepath,
or press Enter to launch a prompt sequence.
usbflash After entering the keyword usbflash you can either follow
it with the location of the source file in this form://
filepath, or press Enter to launch a prompt sequence.
A: Enter this keyword to upgrade the bootflash partition A.
B: Enter this keyword to upgrade the bootflash partition B.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
You must reload Dell Networking OS after executing this command. Use the
command upgrade system stack-unit to copy Dell Networking OS from the
management unit to one or more stack members.
Example
Dell#upgrade system ?
flash: Copy from flash file system (flash://filepath)
ftp: Copy from remote file system, IPv4 or IPv6,
(ftp:/
/userid:password@hostip/filepath)
File Management
49