Reference Guide

Related
Commands
dcb-map – Creates a DCB map to configure PFC and ETS parameters and applies
the PFC and ETS settings on Ethernet ports.
priority-pgid – Configures the 802.1p priority traffic in a priority group for a DCB
map.
dcb-map stack-unit all stack-ports all
Apply the specified DCB map on all ports of the switch stack.
FC Flex IO Modules with I/O Aggregator
Syntax
dcb-map stack-unit all stack-ports all dcb-map-name
To remove the PFC and ETS settings in a DCB map from all stack units, use the no
dcb-map stack-unit all stack-ports all command.
Parameters
dcb-map-
name
Enter the name of the DCB map.
Defaults None
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the FC Flex IO Modules with I/O Aggregator.
Usage
Information
The dcb-map stack-unit all stack-ports all command overwrites any
previous DCB maps applied to stack ports.
Related
Commands
dcb-map – creates a DCB map to configure PFC and ETS parameters and applies
the PFC and ETS settings on Ethernet ports.
show qos dcb-map
Display the DCB parameters configured in a specified DCB map.
FC Flex IO Modules with M I/O Aggregator
Syntax
show qos dcb-map map-name
Parameters
map-name Displays the PFC and ETS parameters configured in the
specified map.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the FC Flex IO module installed in the M I/O
Aggregator.
318
FC Flex IO Modules