Reference Guide

• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Defaults See the defaults settings shown in Parameters.
Command
Modes
LINE
Command
History
Version 9.3.0.0 Introduced on the M I/O Aggregator.
Usage
Information
The software measures the period of inactivity defined in this command as the
period between consecutive keystrokes. For example, if your password is
“password” you can enter “p” and wait 29 seconds to enter the next letter.
SSH Server and SCP Commands
The Dell Networking OS supports secure shell (SSH) protocol versions 1.5 and 2.0. SSH is a protocol for
secure remote login over an insecure network. SSH sessions are encrypted and use authentication. The
SSH and SCP commands are:
• show ip ssh
• show ip ssh client-pub-keys
• show ip ssh rsa-authentication
• ssh
enable password
Change the password for the enable command.
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type]
password [level level] command.
Parameters
level level (OPTIONAL) Enter the keyword level followed by a number
as the level of access. The range is from 1 to 15.
encryption-
type
(OPTIONAL) Enter the number 7 or 0 as the encryption type.
Enter a 7 followed by a text string as the hidden password.
The text string must be a password that was already
encrypted by a Dell Networking router.
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
Security for M I/O Aggregator
249