Reference Guide

• For the Management interface, enter the keyword
ManagementEthernet followed by the slot/port
information. The slot range is 0 and the port range is 0.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
count value (OPTIONAL) Enter the keyword count followed by the count
value. The range is from 1 to 65534. The default is Infinity.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
Information
Use the count option to stop packets from flooding the user terminal when
debugging is turned on.
ip route
Assign a static route to the switch.
Syntax
ip route destination mask {ip-address | interface [ip-address]}
[distance] [permanent][tag tag-value]
To delete a specific static route, use the no ip route destination mask
{address | interface [ip-address]} command.
To delete all routes matching a certain route, use the no ip route
destination mask command.
Parameters
destination Enter the IP address in dotted decimal format of the
destination device.
mask Enter the mask in the slash prefix format (/x) of the
destination device’s IP address.
ip-address Enter the IP address in dotted decimal format of the
forwarding router.
IPv4 Routing
189