Reference Guide

no shutdown
Dell(conf-if)#
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (group).
Syntax
show config
Command
Modes
CONFIGURATION INTERFACE (conf-if-range)
Command
History
Version 8.3.17.0 Supported on the MI/O Aggregator.
Example
Dell(conf)#interface range tengigabitethernet 1/1 - 2
Dell(conf-if-range-tengig-1/1-2)#show config
!
interface TenGigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
switchport
no shutdown
Dell(conf-if-range-tengig-1/1-2)#
show config (from INTERFACE VLAN mode)
Displays the current configuration of the Default VLAN.
Syntax
show config
Command
Modes
INTERFACE VLAN
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-1)#
Interfaces
165