Reference Guide

Related
commands
show vlan— Displays VLAN configuration.
description
Assign a descriptive text string to the interface.
Syntax
description desc_text
To delete a description, enter no description command.
Parameters
desc_text Enter a text string up to 240 characters long.
Defaults No description is defined.
Command
Modes
INTERFACE
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
• Spaces between characters are not preserved after entering this command
unless you enclose the entire description in quotation marks (“desc_text”).
• Entering a text string after the default vlan-id command overwrites any
previous text string configured as the description.
• The show tdr and default vlan-id commands are the only commands
that you can configure on an interface that is a member of a port-channel.
• Use the show interfaces description command to display descriptions
configured for each interface.
Related
commands
show interfaces description— Displays the description field of interfaces..
group
Group two LAGs in a supergroup (“fate-sharing group” or “failover group”).
Syntax
group group_number port-channel number port-channel number
To remove an existing LAG supergroup, use the no group group_number
command.
Parameters
group_number
Enter an integer from 1 to 32 that will uniquely identify this
LAG fate-sharing group.
152
Interfaces