Reference Guide

Parameters
all Enable all the debug options.
acl Enable for ACL specific debugs.
error Enable for Error specific debugs.
ifm Enable for IFM specific debugs.
info Enable for Information specific debugs.
ipc Enable for IPC specific debugs.
rx Enable for packet receive specific debugs.
packet-type Specify the packet type. Options are:
• all
• discovery
• virtual-link-instantiation
• virtual-link-maintenance
• vlan-discovery
all Enable for all the packet types.
discovery Enable for FIP discovery solicits (enodes) and adverts (fcf).
virtual-link-
instantiation
Enable for flogi, fdisc and flogo packets.
virtual-link-
maintenance
Enable for clear virtual link and keepalive packets.
vlan-discovery Enable for FIP VLAN requests and notifications.
fortyGigE FortyGigabit Ethernet interface.
port-channel Port-channel interface.
tengigabitether
net
TenGigabit Ethernet interface.
tx Enable for packet transmit specific debugs.
Command
Modes
EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
show fip-snooping config
Displays the FIP snooping status and configured FC-MAP values.
Syntax
show fip-snooping config
132
FIP Snooping