Users Guide

256M bytes of boot flash memory.
1 34-port GE/TE (XL)
56 Ten GigabitEthernet/IEEE 802.3 interface(s)
Command Fields
Lines Beginning
With
Description
Dell Force10
Network...
Name of the operating system
Dell Force10
Operating...
OS version number
Dell Force10
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build les loaded on the system
Dell Force10 uptime
is...
Amount of time the system has been up
System image... Image le name
Chassis Type: System type (M I/O Aggregator)
Control
Processor:...
Control processor information and amount of memory on processor
256M bytes... Amount of boot ash memory on the system
1 34 Port Hardware conguration of the system, including the number and type of physical
interfaces available
upgrade boot
Upgrade the bootash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 |
all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootash and bootselecter images.
bootash-image Enter the keywords bootflash-image to change the bootash image.
bootselector-image Enter the keywords bootselector-image to change the bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
all Enter the keyword all to upgrade all the member stack-units.
booted Enter the keyword booted to upgradefrom the current image in the M I/O Aggregator.
ftp: After entering the keyword ftp:, you can either follow it with the location of the source
le in this form: //userid:password@hostip/filepath or press Enter to launch a
prompt sequence.
File Management 43