Users Guide

show users
Allows you to view information on all users logged in to the switch.
Syntax
show users [all]
Parameters
all (OPTIONAL) Enter the keyword all to view all terminal lines in the switch.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show user command shown in the following example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell# show users
Authorization Mode: role or privilege
Line User Role Priv Host(s) Location
* 0 console 0 unassigned 1 idle
2 vty 0 admin unassigned 1 idle 10.16.127.35
3 vty 1 ad unassigned 15 idle
10.16.127.145
4 vty 2 ad1 sysadmin 1 idle
10.16.127.141
5 vty 3 ad1 sysadmin 1 idle
10.16.127.145
6 vty 4 admin unassigned 1 idle
10.16.127.141
7 vty 5 ad unassigned 15 idle
10.16.127.141
Dell#
Related Commands ssh— enables a user.
ssh
Open an SSH connection specifying the host name, username, port number and version of the SSH client.
Dell Networking OS supports both inbound and outbound SSH sessions using IPv4 addressing. Inbound SSH supports accessing the
system through the management interface as well as through a physical Layer 3 interface.
Syntax
ssh {hostname | ipv4 address} [-| username | -p port-number|-v {1|2}]
344 Security