Users Guide

Parameters

c Enter a delineator character to specify the limits of the text banner. The delineator is a

percent character (%).

line Enter a text string for your MOTD banner the message with your delineator. The

delineator is a percent character (%).

Defaults No banner is congured.

Command Modes CONFIGURATION

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

9.3(0.0) Supported on the M I/O Aggregator.

Usage Information After entering the banner login command, type one or more spaces and a delineator character. Enter the banner

text then the second delineator character. When the user is connected to the router, if a message of the day

banner is congured, it displays rst. If no message of the day banner is congured, the login banner and prompt

appear. After the user has logged in, the EXEC banner (if congured) displays.

Related Commands

banner exec — enables the display of a text string when you enter EXEC mode.

banner login — sets a banner to display after successful login to the system.

debug radius

View RADIUS transactions to assist with troubleshooting.

Syntax

debug radius

To disable debugging of RADIUS, use the no debug radius command.

Defaults Disabled.