Users Guide

aaa authorization cong-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no aaa authorization
config-commands command.
Defaults Enabled when you congure aaa authorization commands command.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
Usage Information By default, the aaa authorization commands command congures the system to check both EXEC level
and CONFIGURATION level commands. Use the command no aaa authorization config-commands to
enable only EXEC-level command checking.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-authenticated
|| none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
name Dene a name for the list of authorization methods.
default Dene the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Security 319