Users Guide

clear mac-address-table dynamic

Clear the MAC address table of all MAC addresses learned dynamically.

Syntax

clear mac-address-table dynamic {address mac-address | all | interface

interface | vlan vlan-id}

Parameters

address mac-

address

Enter the keyword address followed by a MAC address in nn:nn:nn:nn:nn:nn format.

all Enter the keyword all to delete all MAC address entries in the MAC address table.

interface interface Enter the following keywords and slot/port or number information:

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet

followed by the slot/port information.

vlan vlan-id Enter the keyword vlan followed by a VLAN ID number from 1 to 4094.

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

description

Add a description about the selected VLAN.

Syntax

description description

To remove the description from the VLAN, use the no description command.

Parameters

description Enter a text string description to identify the VLAN (80 characters maximum).

Defaults none