Users Guide
iSCSI Optimization
Internet small computer system interface (iSCSI) optimization enables quality-of-service (QoS) treatment for iSCSI storage trac on an
Aggregator.
NOTE: When iSCSI storage devices are detected on the server-ports, storm-control is disabled on those ports. When the iSCSI
devices are o the ports, storm-control is enabled again.
Topics:
• advertise dcbx-app-tlv
• iscsi aging time
• iscsi cos
• iscsi enable
• iscsi priority-bits
• iscsi prole-compellent
• iscsi target port
• show iscsi
• show iscsi sessions
• show iscsi sessions detailed
advertise dcbx-app-tlv
Congure DCBX to send iSCSI TLV advertisements.
Syntax
advertise dcbx-app-tlv iscsi
To disable DCBX iSCSI TLV advertisements, use the no advertise dcbx-app-tlv iscsi command.
Defaults Disabled.
Command Modes PROTOCOL LLDP
Supported Modes
Programmable-Mux (PMUX)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information You can congure iSCSI TLVs to send either globally or on a specied interface. The interface conguration takes
priority over global conguration.
16
248 iSCSI Optimization