Users Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator

181

182

183

184

185

186

187

188

189

190

Field Description

Member Ports Indicates the member ports of the port channel. If the port channel is VLT, an asterisk (*)

after the port channel number indicates the port channel is locally down and that a

remote VLT port is up.

show ip igmp interface

View information on the interfaces participating in IGMP.

Syntax

show ip igmp interface [interface]

Parameters

interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear

counters from a specied interface:

• For a Port Channel interface, enter the keyword port-channel followed by a number.

Range: 1-128

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed

by the slot/port information.

• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes

• EXEC

• EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Example

Dell#show ip igmp interface

Vlan 2 is up, line protocol is down

Inbound IGMP access group is not set

Interface IGMP group join rate limit is not set

IGMP snooping is enabled on interface

IGMP Snooping query interval is 60 seconds

IGMP Snooping querier timeout is 125 seconds

IGMP Snooping last member query response interval is 1000 ms

IGMP snooping fast-leave is disabled on this interface

IGMP snooping querier is disabled on this interface

Vlan 3 is up, line protocol is down