Users Guide
debug ip dhcp client packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface type slot/
port
Display log messages for DHCP packets sent and received on the specied interface.
• For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port range is
0
•
For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Command Modes EXEC Privilege
Supported Modes All Modes
Default None
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
ip address dhcp
Acquire an IP address dynamically on an interface from the DHCP server.
Syntax
ip address dhcp [relay | vendor-class-identifier]
To disable DHCP Client on an interface, use the no ip address dhcp command.
Command Modes INTERFACE
Supported Modes All Modes
Default Enabled
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
In the I/O Aggregator, the DHCP client is enabled only on the default VLAN and management interface 0/0. Use
the ip address command to assign a static IP address that overwrites the dynamically assigned IP address.
136 Dynamic Host Conguration Protocol