Reference Guide

Important Points to Remember
• When you restore all the units in a stack, all units in the stack are placed into stand-alone mode.
• When you restore a single unit in a stack, only that unit is placed in stand-alone mode. No other units
in the stack are affected.
• When you restore the units in stand-alone mode, the units remain in stand-alone mode after the
restoration.
• After the restore is complete, the units power cycle immediately.
The following example shows the using the restore factory-defaults command to restore the Factory
Default Settings.
Restoring the Factory Default Settings
Dell#restore factory-defaults stack-unit 0 nvram
***********************************************************************
* Warning - Restoring factory defaults will delete the existing *
* persistent settings (stacking, fanout, etc.) *
* After restoration the unit(s) will be powercycled immediately. *
* Proceed with caution ! *
*********************************************************************** Proceed
with factory
settings? Confirm [yes/no]:yes
-- Restore status -- Unit Nvram Config
------------------------
0 Success
Power-cycling the unit(s).
....
286
Debugging and Diagnostics