Reference Guide

iSCSI LLDP monitoring starts to automatically detect EqualLogic arrays.
iSCSI optimization requires LLDP to be enabled. LLDP is enabled by default when an Aggregator auto-
configures.
The following message displays when you enable iSCSI on a switch and describes the configuration
changes that are automatically performed:
%STKUNIT0-M:CP %IFMGR-5-IFM_ISCSI_ENABLE: iSCSI has been enabled causing flow
control to be enabled on all interfaces. EQL detection and enabling iscsi
profile-compellent on an interface may cause some automatic configurations to
occur like jumbo frames on all ports and no storm control and spanning tree
port-fast on the port of detection.
Displaying iSCSI Optimization Information
To display information on iSCSI optimization, use the show commands detailed in the below table:
Table 7. Displaying iSCSI Optimization Information
Command Output
show iscsi Displays the currently configured iSCSI settings.
show iscsi sessions Displays information on active iSCSI sessions on the
switch.
show iscsi sessions detailed [session isid] Displays detailed information on active iSCSI sessions
on the switch. To display detailed information on
specified iSCSi session, enter the session’s iSCSi ID.
show run iscsi Displays all globally-configured non-default iSCSI
settings in the current Dell Networking OS session.
show iscsi Command Example
Dell# show iscsi
iSCSI is enabled
iSCSI session monitoring is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
show iscsi sessions Command Example
Dell# show iscsi sessions
Session 0:
--------------------------------------------------------------------------------
---------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
122
iSCSI Optimization