Users Guide
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
Members
Fc 0/9
Te 0/11 Te 0/12
Table 32. show fcoe-map Field Descriptions
Field Description
Fabric-Name Name of a SAN fabric.
Fabric ID The ID number of the SAN fabric to which FC trac is forwarded.
VLAN ID The dedicated VLAN used to transport FCoE storage trac between servers and a fabric over
the NPG. The congured VLAN ID must be the same as the fabric ID.
VLAN priority FCoE trac uses VLAN priority 3. This setting is not user-congurable.
FC-MAP FCoE MAC-address prex value - The unique 24-bit MAC address prex that identies a
fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Cong-State Indicates whether the congured FCoE and FC parameters in the FCoE map are valid: Active
(all mandatory FCoE and FC parameters are correctly congured) or Incomplete (either the
FC-MAP value, fabric ID, or VLAN ID are not correctly congured).
Oper-State Operational status of the link to the fabric: up (link is up and transmitting FC trac), down (link
is down and not transmitting FC trac), link-wait (link is up and waiting for FLOGI to complete
on peer FC port), or removed (port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated FCoE VLAN that carries
storage trac to the specied fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
NPIV Proxy Gateway
293