Users Guide

Example of the show fcoe-map Command
Dell(conf)#do show fcoe-map
Fabric Name map
Fabric Type Fport
Fabric Id 1002
Vlan Id 1002
Vlan priority 3
FC-MAP 0efc00
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State UP
=======================================================
Switch Config Parameters
=======================================================
DomainID 2
=======================================================
Switch Zoning Parameters
=======================================================
Default Zone Mode: Deny
Active Zoneset: set
=======================================================
Members
Fc 0/41
Te 0/29
=======================================================
=======================================================
Example of the show fc ns switch Command
Dell(conf)#do show fc ns sw
Total number of devices = 1
Switch Name 28:4e:55:4c:4c:29:00:00
Domain Id 2
Switch Port 4
FC-Id 02:04:03
Port Name 20:01:d4:ae:52:44:37:b2
Node Name 20:00:d4:ae:52:44:37:b2
Class of Service 8
Symbolic Port Name Broadcom Port0 pWWN 20:01:d4:ae:52:44:37:b2
Symbolic Node Name Broadcom BCM57810 FCoE 7.6.3.0 7.6.59.0 WIN-KBFI7FJ2FUH
Port Type N_Port
Example of the show fc ns switch brief Command
Dell#show fc ns switch brief
Total number of devices = 1
Intf# Domain FC-ID Enode-WWPN Enode-WWNN
Fc 0/3 1 01:35:00 10:00:8c:7c:ff:17:f8:01 20:00:8c:7c:ff:17:f8:01
Dell#
Example of the show fc zoneset Command
Dell#show fc zoneset
ZoneSetName ZoneName ZoneMember
========================================
fcoe_srv_fc_tgt
brcd_sanb
brcd_cna1_wwpn1
sanb_p2tgt1_wwpn
Active Zoneset: fcoe_srv_fc_tgt
ZoneName ZoneMember
========================================
brcd_sanb
10:00:8c:7c:ff:21:5f:8d
20:02:00:11:0d:03:00:00
Dell#
280
FC FLEXIO FPORT