Users Guide

Delay-Restore Abort Threshold : 60 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer : 0 seconds
Multicast peer-routing timeout : 150 seconds
Dell#
5 Congure the secondary VLT.
NOTE: Repeat steps from 1 through 4 on the secondary VLT, ensuring you use the dierent backup destination and unit-
id.
Dell#show vlt br
VLT Domain Brief
------------------
Domain ID : 1
Role : Secondary
Role Priority : 32768
ICL Link Status : Up
HeartBeat Status : Up
VLT Peer Status : Up
Version : 6(3)
Local System MAC address : 00:01:e8:8a:e9:91
Remote System MAC address : 00:01:e8:8a:e9:76
Remote system version : 6(3)
Delay-Restore timer : 90 seconds
Delay-Restore Abort Threshold : 60 seconds
Peer-Routing : Disabled
Peer-Routing-Timeout timer : 0 seconds
Multicast peer-routing timeout : 150 seconds
Dell#
Dell#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status
Active VLANs
------------------- ------------ ----------- ----------
128 128 UP UP 1
Dell#
6 Show the running congurations on this port-channel.
Dell(conf-if-po-128)#show config
!
interface Port-channel 128
portmode hybrid
switchport
vlan tagged 10-15
vlan untagged 20
shutdown
Dell(conf-if-po-128)#end
Dell#
7 Show the VLAN congurations.
Dell#show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P - Primary, C -
Community, I - Isolated
O - Openflow
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
o - OpenFlow untagged, O - OpenFlow tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Q Ports
* 1 Active U Te 0/33
10 Active T Po128(Te 0/41-42)
T Te 0/1
11 Active T Po128(Te 0/41-42)
T Te 0/1
12 Active T Po128(Te 0/41-42)
T Te 0/1
13 Active T Po128(Te 0/41-42)
254
PMUX Mode of the IO Aggregator