Users Guide

Viewing Interface Information
Displaying Non-Default Congurations.
The show [ip | running-config] interfaces configured command allows you to display only interfaces that have non-
default congurations are displayed.
The below example illustrates the possible show commands that have the available configured keyword.
Dell#show interfaces configured
Dell#show interfaces tengigabitEthernet 0 configured
Dell#show ip interface configured
Dell#show ip interface tengigabitEthernet 1 configured
Dell#show ip interface brief configured
Dell#show running-config interfaces configured
Dell#show running-config interface tengigabitEthernet 1 configured
In EXEC mode, show interfaces switchportcommand displays only interfaces in Layer 2 mode and their relevant conguration
information. The show interfaces switchport command displays the interface, whether the interface supports IEEE 802.1Q
tagging or not, and the VLANs to which the interface belongs.
show interfaces switchport Command Example:
Dell#show interfaces switchport
Name: TenGigabitEthernet 13/0
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TenGigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TenGigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan 2
Name: TenGigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--
Clearing Interface Counters
The counters in the show interfaces command are reset by the clear counters command. This command does not clear the
counters captured by any SNMP program.
To clear the counters, use the following command in EXEC Privilege mode:
1 Clear the counters used in the show interface commands for all VLANs, and physical interfaces or selected ones.
Without an interface specied, the command clears all interface counters.
• (OPTIONAL) Enter the following interface keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword port-channel followed by a number from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port numbers.
118
Interfaces