Reference Guide

iSCSI Optimization | 153
Displaying iSCSI Optimization Information
Use the show commands in Table 11-2 to display information on iSCSI optimization.
Figure 11-2. show iscsi Command Example
Figure 11-3. show iscsi sessions Command Example
Table 11-2. Displaying iSCSI Optimization Information
Command Output
show iscsi (Figure 11-2) Displays the currently configured iSCSI settings.
show iscsi sessions (Figure 11-3) Displays information on active iSCSI sessions on the switch.
show iscsi sessions detailed [session isid]
(Figure 11-4)
Displays detailed information on active iSCSI sessions on the switch. To
display detailed information on specified iSCSi session, enter the session’s
iSCSi ID.
show run iscsi Displays all globally-configured non-default iSCSI settings in the current
FTOS session.
FTOS# show isci
iSCSI is enabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
FTOS# show isci sessions
Session 0:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000
Session 1:
-----------------------------------------------------------------------------------------
Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011
Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg
ISID: 400001370000.