Administrator Guide

When executing this command on the master, the stack reloads. When the
members are renumbered, only that specific unit is reset and comes up with the
new unit number.
Example
Dell#stack-unit 5 renumber 4
Renumbering will reset the unit.
Warning: Interface configuration for current unit will be lost!
Proceed to renumber [confirm yes/no]:
Related
Commands
• reload – reboots Dell Networking Operating System (OS).
• reset stack-unit – resets the designated S-Series stack member.
• show system – displays the current status of all stack members or a specific
member.
264
Stacking Commands