Administrator Guide

• enable restricted
• service password-encryption
• show users
• username
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method
[... method2]
To return to the default setting, use the no aaa authentication enable
{default | method-list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication
methods to use as the default sequence of methods for the
Enable login. The default is default enable.
method-list-
name
Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command defines
in LINE mode.
• none: no authentication.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ server(s) configured with the
tacacs-server host command.
... method2 (OPTIONAL) In the event of a “no response” from the first
method, Dell Networking Operating System (OS) applies the
next configured method.
Defaults Use the enable password.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator.
Usage
Information
By default, the Enable password is used. If you configure aaa authentication
enable default
, Dell Networking Operating System (OS) uses the methods
defined for Enable access instead.
222
Security for M I/O Aggregator