Administrator Guide

• Receive enterin
• Transmit enterout
interface in |
out
Enter the following keywords and slot/port or number
information:
• For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Defaults none
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
show lacp
Displays the LACP matrix.
Syntax
show lacp port-channel-number [sys-id | counters]
Parameters
port-channel-
number
Enter a port-channel number:
The range is from 1 to 128.
sys-id (OPTIONAL) Enter the keywords sys-id and the value that
identifies a system.
counters (OPTIONAL) Enter the keyword counters to display the
LACP counters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example (Port-
Channel-
Number)
Dell#show lacp 128
Port-channel 1 admin up, oper up, mode lacp
Actor System ID:Priority 32768, Address 0001.e800.a12b
Partner System ID:Priority 32768, Address 0001.e801.45a5
Actor Admin Key 1, Oper Key 1, Partner Oper
Key 1
LACP LAG 1 is an aggregatable link
Link Aggregation Control Protocol (LACP)
201