Administrator Guide

Is Configuration Source? FALSE
Local DCBX Compatibility mode is IEEEv2.5
Local DCBX Configured mode is IEEEv2.5
Peer Operating version is Not Detected
Local DCBX TLVs Transmitted: ErPfi
0 Input PFC TLV pkts, 0 Output PFC TLV pkts, 0 Error PFC pkts
0 PFC Pause Tx pkts, 0 Pause Rx pkts
0 Input ETS Conf TLV pkts, 0 Output ETS Conf TLV pkts, 0 Error
ETS Conf TLV
pkts
0 Input ETS Reco TLV pkts, 0 Output ETS Reco TLV pkts, 0 Error
ETS Reco TLV
pkts
0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV
pkts, 0 Error
Appln Priority TLV pkts
Total DCBx Frames transmitted 0
Total DCBx Frames received 0
Total DCBx Frames errors 0
Total DCBx Frames unrecognized 0
Dell#
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
Syntax
show interface port-type slot/port ets {summary | detail}
Parameters
port-type slot/
port ets
Enter the port-type slot and port ETS information.
{summary |
detail}
Enter the keyword summary for a summary list of results or
enter the keyword
detail for a full list of results.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
To clear ETS TLV counters, use the clear ets counters interface port-
type slot/port command.
The following describes the show interface summary command shown in the
following example.
Field Description
Interface Interface type with stack-unit and port number.
Max Supported
TC Group
Maximum number of priority groups supported.
Data Center Bridging (DCB)
109