Users Guide

unit 0–0 {counters |
details | port-stats
[detail] | register}
Enter the keyword unit then 0 for port-pipe 0, and then enter one of the following
keywords to troubleshoot errors on the selected port-pipe and to give status on why a
port is not coming up to register level: counters, details, port-stats
[detail]
, or register.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.8(0.0) Replaced the keyword port with interface.
8.3.17.0 Supported on the M I/O Aggregator.
Example (show
hardware stack-unit
phy-rmware-
version Command)
Dell#show hardware stack-unit 1 phy-firmware-version
PortNumber Status Programmed Version SW Version
=======================================================================
41 Present 01.05 01.05
42 Present 01.05 01.05
43 Present 01.05 01.05
44 Present 01.05 01.05
45 Not Present N/A N/A
46 Not Present N/A N/A
47 Not Present N/A N/A
48 Not Present N/A N/A
49 Present 01.06 01.06
50 Present 01.06 01.06
51 Present 01.06 01.06
52 Present 01.06 01.06
53 Present 01.06 01.06
54 Present 01.06 01.06
55 Present 01.06 01.06
56 Present 01.06 01.06
Dell#
In the above example, the Status eld represents presence of OPTM ports, Programmed version eld represents
loaded rmware version, and SW version represents the SDK version.
Example (data-
plane)
Dell#show hardware stack-unit 1 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :7392
noMhdr :0
noMbuf :0
noClus :0
recvd :7392
dropped :0
recvToNet :7392
rxError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
rxPkt(COS2) :10
rxPkt(COS3) :0
rxPkt(COS4) :0
rxPkt(COS5) :338
rxPkt(COS6) :0
rxPkt(COS7) :7044
rxPkt(UNIT0) :7392
transmitted :29899
txRequested :29899
noTxDesc : 0
txError :0
txReqTooLarge :0
txInternalError :0
398 Debugging and Diagnostics