Users Guide
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
Usage Information
You can assign physical port or port-channel interfaces to an uplink-state group.
You can assign an interface to only one uplink-state group. Congure each interface assigned to an uplink-state
group as either an upstream or downstream interface, but not both.
You can assign individual member ports of a port channel to the group. An uplink-state group can contain either the
member ports of a port channel or the port channel itself, but not both.
Example
Dell(conf-uplink-state-group-16)# upstream gigabitethernet 1/10-15
Dell(conf-uplink-state-group-16)#
Related Commands
• downstream — assigns a port or port-channel to the uplink-state group as a downstream interface.
380 Uplink Failure Detection (UFD)