Users Guide

NOTE: The question mark (?) and the tilde (~) are not supported characters.
Related Commands
show running-cong — views the current conguration.
enable restricted
Allows Dell Networking technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted command.
Parameters
encryption-type
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The text string must be a
password that was already encrypted by a Dell Networking router.
Use this parameter only with a password that you copied from the show running-
config le of another Dell Networking router.
password Enter a text string, up to 32 characters long, as the clear text password.
Command Modes Not congured.
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information Only Dell Networking Technical Support sta use this command.
enable sha256-password
Congure SHA-256 based password for the enable command.
Syntax
enable sha256-password [level level] [encryption-type] password
To delete a password, use the no enable sha256-password [encryption-type] password
[level level] command.
Parameters
sha256-password Enter the keyword sha256-password then the encryption-type or the password.
level level (OPTIONAL) Enter the keyword level then a number as the level of access. The range
is from 1 to 15.
encryption-type
(OPTIONAL) Enter the number 8 or 0 as the encryption type.
Enter 8 to enter the sha256–based hashed password.
330 Security