Users Guide

Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 3 (four queues per
interface; four queues are reserved for control trac).
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to the
queue in character format (32 character maximum).
NOTE: This option is available under policy-map-input only.
qos-policy qos-
policy-name
(OPTIONAL) Enter the keywords qos-policy then the QoS policy name assigned to
the queue in text format (32 characters maximum). This species the input QoS policy
assigned to the queue under policy-map-input and output QoS policy under
policy-map-output context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command assigns a class map or QoS policy to dierent queues.
Related Commands
service-policy output — applies an output policy map to the selected interface.
show qos dcb-map
Display the DCB parameters congured in a specied DCB map.
Syntax
show qos dcb-map map-name
Parameters
map-name Displays the PFC and ETS parameters congured in the specied map.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
Usage Information
Use the show qos dcb-map command to display the enhanced transmission selection (ETS) and priority-based
ow control (PFC) parameters used to congure server-facing Ethernet ports.
Quality of Service (QoS) 305