Users Guide

File Management
This chapter contains commands needed to manage the conguration les and includes other le management commands.
boot system gateway
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
Parameters
ip-address Enter an IP address in dotted decimal format.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
Saving the address to the startup conguration le preserves the address in NVRAM in case the startup
conguration le is deleted.
boot system stack-unit
Specify the location of the Dell Networking OS image to be used to boot the system.
Syntax
boot system stack-unit <0-5 | all> {default | primary | secondary}
Parameters
0-5 Enter the stack member unit identier of the stack member.
all Enter the keyword all to set the primary, secondary, and default images for the system.
default Enter the keyword default to set the default image path for the system.
primary Enter the keyword primary to set the primary image path for the system.
secondary Enter the keyword secondary to set the secondary image path for the system.
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.17.0 Supported on the M I/O Aggregator.
4
28 File Management