Users Guide

• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet
followed by the slot/port information.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specic interface.
Syntax
clear lldp neighbors {interface}
Parameters
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
Defaults none
Command Modes EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
debug lldp interface
Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming and outgoing
packets.
Syntax
debug lldp interface {interface | all}{events | packet {brief | detail} {tx |
rx | both}}
To disable debugging, use the no debug lldp interface {interface | all}{events} {packet
{brief | detail} {tx | rx | both}} command.
Parameters
interface Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet
followed by the slot/port information.
all (OPTIONAL) Enter the keyword all to display information on all interfaces.
272 Link Layer Discovery Protocol (LLDP)