Users Guide
Syntax
no {boot | default | enable | ftp-server | hardware | hostname | ip | line |
logging | monitor | service | io-aggregator broadcast storm-control | snmp-
server | username}
Defaults None
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Filtering show Commands
To nd specic information, display certain information only or begin the command output at the rst instance of a regular expression or
phrase, you can lter the display output of a show command.
When you execute a show command, and then enter a pipe ( | ), one of the following parameters, and a regular expression, the resulting
output either excludes or includes those parameters.
NOTE
: The Dell Networking OS accepts a space before or after the pipe, no space before or after the pipe, or any combination.
For example: Dell#command | grep TenGig|except regular-expression | find regular-expression.
except
displays only the text that does not match the pattern (or regular expression)
find
searches for the rst occurrence of a pattern
grep
displays text that matches a pattern.
no-more
does not paginate the display output
save
copies the output to a le for future use
The grep command option has an ignore-case sub-option that makes the search case-insensitive. For example, the commands:
• show run | grep Ethernet returns a search result with instances containing a capitalized “Ethernet,” such as interface
TenGigabitEthernet 0/1.
• show run | grep ethernet does not return the search result above because it only searches for instances containing a non-capitalized
“ethernet”.
• show run | grep Ethernet ignore-case returns instances containing both “Ethernet” and “ethernet”.
Displaying All Output
To display the output all at once (not one screen at a time), use the no-more option after the pipe. This operation is similar to the
terminal length screen-length command except that the no-more option aects the output of just the specied command.
For example:
Dell#show running-config|no-more
Filtering the Command Output Multiple Times
You can lter a single command output multiple times. To lter a command output multiple times, place the save option as the last lter.
For example:
CLI Basics
25