Users Guide

Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the interface congurations
corresponding to a range of ports.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show interfaces switchport command for the following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”),
which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with Dell Networking OS
version 7.6.1, this eld can display native VLAN membership by port 13/0.
Example
Dell#show interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT
tagged
Name: TenGigabitEthernet 1/1
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
Name: TenGigabitEthernet 1/2
802.1QTagged: Hybrid
IO-AGG port mode: Auto VLANs enabled
Vlan membership:
Q Vlans
U 1
T 2-4094
Native VlanId: 1.
--More--
Related Commands
show ip interface — displays Layer 3 information about the interfaces.
show tdr
Displays the TDR test results.
Syntax
show tdr interface
Parameters
interface Enter the keyword TenGigabitEthernet followed by the slot/port information for the
100/1000/10 GbaseT Ethernet interface.
Defaults none
Command Modes EXEC
218 Interfaces