Users Guide

show fc switch
Display the switch conguration for Fibre Channel capability.
M I/O Aggregator with the FC Flex IO module
Syntax
show fc switch
Parameters None
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.7(0.0) Introduced on the M I/O Aggregator.
Usage Information
The following table describes the show fc switch output shown in the following example.
Switch Mode Fibre Channel mode of operation of an Aggregator.
Switch WWN Factory-assigned worldwide node (WWN) name of the Aggregator. The M I/O
Aggregator WWN name is not user-congurable.
Example
Dell(conf)#do show fc switch
Switch Mode : NPG
Switch WWN : 10:00:aa:00:00:00:00:ac
Dell(conf)#
show fcoe-map
Display the Fibre Channel and FCoE conguration parameters in FCoE maps.
M I/O Aggregator with the FC Flex IO module
Syntax
show fcoe-map [brief | map-name]
Parameters
brief Displays an overview of currently congured FCoE maps.
map-name Displays the FC and FCoE conguration parameters in a specied FCoE map. The FCoE
map is applied on Ethernet (FCoE) and FC ports to transmit FC storage trac to a
specied fabric.
Command Modes
• EXEC
• EXEC Privilege
144 FC Flex IO Modules