Users Guide

Command Modes INTERFACE
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
The maximum number of lossless queues globally supported on the switch is two.
The following lists the dot1p priority-queue assignments.
dot1p Value in
the Incoming
Frame
Description heading
0 0
1 0
2 0
3 1
4 2
5 3
6 3
7 3
pfc priority
Congure the CoS trac to be stopped for the specied delay.
Syntax
pfc priority priority-range
To delete the pfc priority conguration, use the no pfc priority command.
Parameters
priority-range Enter the 802.1p values of the frames to be paused. Separate the priority values with a
comma; specify a priority range with a dash; for example, pfc priority 1,3,5-7. The range is
from 0 to 7.
Defaults none
Command Modes Interface
Supported Modes Programmable-Mux (PMUX)
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
112 Data Center Bridging (DCB)