Reference Guide

Data Center Bridging | 91
dcb enable auto-detect on-next-reload
Enables or disables global DCB on a subsequent reload. This command also internally configures PFC
buffers based on DCB enable/disable. Save and reload is mandatory for the configurations to take
effect. Auto-detect keyword can be used to re-enable IOA with port wise DCB auto detect feature.
Syntax
dcb enable {on-next-reload | auto-detect on-next-reload}
To disable global DCB on a subsequent reload, use the no dcb enable on-next-reload command.
Parameters
Defaults
DCB is globally enabled with auto-detect feature.
Command Modes
CONFIGURATION
Command
History
auto-detect
Enter this key word to re-enable the Aggregator with port wise DCB auto detect
feature.
Version 8.3.17.3 Added auto-detect parameter.
Version 8.3.17.0 Supported on M I/O Aggregator