Reference Guide

90 | Data Center Bridging
www.dell.com | support.dell.com
DCBX Commands
• dcbx version
• show dcb
• show interface dcbx detail
clear ets counters
Clear ETS TLV counters.
Syntax
clear ets counters [tengigabitethernet slot/port]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax
clear pfc counters [port-type slot/port [statistics]]| [stack-unit
{unit-number | all} stack-ports all]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
If you do not use the statistics parameter, both hardware and DCBx counters clear.
slot/port Enter the slot/port number.
Version 8.3.17.0 Supported on M I/O Aggregator
port-type
Enter the keywords port-type then the slot/port information.
stack-unit unit
number
Enter the keywords stack-unit then the stack-unit number to clear. Valid values: 0
to 5.
all stack-ports all
Enter the keywords all stack-ports all to clear the counters on all interfaces.
statistics
Enter the keyword statistics to clear only the hardware PFC counters.
Version 8.3.17.0 Supported on the M I/O Aggregator