Reference Guide

66 | Control and Monitoring
www.dell.com | support.dell.com
show system
Displays the current status of all stack members or a specific stack member.
Syntax
show system [brief | stack-unit unit-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Figure 5-26 shows the output from the show system brief command.
Figure 5-27 shows the output from the
show system stack-unit command.
Example
Figure 5-26. show system brief Command Example
brief
(OPTIONAL) Enter the keyword brief to view an abbreviated list of system
information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the stack member ID for
information on that stack member. Therange is from 0 to 5.
Version 8.3.17.0 Supported on the M I/O Aggregator.
FTOS#show system brief
Stack MAC : 00:01:e8:00:ab:03
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
--------------------------------------------------------------------------------
----
0 Member not present
1 Management online I/O-Aggregator I/O-Aggregator 8-3-17-38 56
2 Member not present
3 Member not present
4 Member not present
5 Member not present
FTOS#