Reference Guide

Control and Monitoring | 45
Command Modes
CONFIGURATION
Command
History
Usage
Information
After you enable FTP server functions with the ftp-server enable command, Dell Networking
recommends specifying a top-level directory path. Without a top-level directory path specified, the
FTOS directs users to the flash directory when they log in to the FTP server.
Related
Commands
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type] password
Parameters
Defaults
Not enabled.
Command Modes
CONFIGURATION
Command
History
hostname
Set the host name of the system.
Syntax
hostname name
Parameters
Defaults
FTOS
Command Modes
CONFIGURATION
Version 8.3.17.0 Supported on M I/O Aggregator
ftp-server enable Enables FTP server functions on the M I/O Aggregator.
ftp-server username Sets a username and password for incoming FTP connections to the M I/O
Aggregator.
username
Enter a text string up to 40 characters long as the user name.
password password Enter the keyword password followed by a string up to 40 characters long as
the password.
Without specifying an encryption type, the password is unencrypted.
encryption-type
(OPTIONAL) After the keyword password enter one of the following
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for hidden text password.
Version 8.3.17.0 Supported on M I/O Aggregator
name
Enter a text string, up to 32 characters long.