Reference Guide

42 | Control and Monitoring
www.dell.com | support.dell.com
debug ifm trace-flags
Turn on the IFM internal trace-flags.
Syntax
debug ifm trace-flags trace-flags
Disable this command using the no debug ifm trace-flags command.
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
Disable this command using the no debug ifm trace-flags command.
disable
Return to EXEC mode.
Syntax
disable [level]
Parameters
Defaults
1
Command Modes
EXEC Privilege
Command
History
enable
Enter the EXEC Privilege mode or any other privilege level configured. After entering this command,
you may need to enter a password.
Syntax
enable [level]
trace-flag
Enter a hexadecimal number representing the trace-flag.
Version 8.3.17.0 Supported on the M I/O Aggregator.
Note: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical support
representative instructs you to do so.
level
(OPTIONAL) Enter a number for a privilege level of the FTOS.
Range: 0 to 15.
Default: 1
Version 8.3.17.0 Supported on M I/O Aggregator