Reference Guide

Control and Monitoring | 41
configure
Enter the CONFIGURATION mode from EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 5-1. configure Command Example
debug cpu-traffic-stats
Enable the collection of CPU traffic statistics.
Syntax
debug cpu-traffic-stats
Defaults
Disabled
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command enables (and disables) the collection of CPU traffic statistics from the time this
command is executed (not from system boot). However, excessive traffic received by a CPU
automatically triggers (turns on) the collection of CPU traffic statistics. Use the show configuration
lock to view the traffic statistics.
If excessive traffic is received by CPU, traffic is rate controlled
Related
Commands
terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring from the
terminal.
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS#configure
FTOS(conf)#
Version 8.3.17.0 Supported on the M I/O Aggregator.
Note: This command must be enabled before the show configuration lock command displays
traffic statistics
. Dell Networking recommends disabling debugging (no debug
cpu-traffic-stats)
after troubleshooting is complete.
show configuration
lock
Displays the cpu traffic statistics