Reference Guide

40 | Control and Monitoring
www.dell.com | support.dell.com
asset-tag
Assign and store a unique asset-tag to the stack member.
Syntax
asset-tag stack-unit unit id Asset-tag ID
To remove the asset tag, use the no stack-unit unit-id Asset-tag ID command.
Parameters
Defaults
No asset-tag is assigned.
Command Modes
EXEC Privilege
Command
History
t-
Related
Commands
clear alarms
Clear the alarms on the system.
Syntax
clear alarms
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command clears alarms that are no longer active. If an alarm situation is still active, it is seen in
the system output.
clear command history
Clear the command history log.
Syntax
clear command history
Command Modes
EXEC Privilege
Command
History
Related
Commands
stack-unit
unit-id
Enter the keyword stack-unit then the unit-id to assign a tag to the specific member. The
range is from 0 to 5.
Asset-tag ID
Enter a unique asset-tag ID to assign to the stack member. This option accepts a maximum
of 10 characters, including all special characters except double quotes. To include a space
in the asset-tag, enter a space within double quotes.
Version 9.2 (0.0) Introduced on the M I/O Aggregator.
show system
Displays the current status of all stack members or a specific member
.
Version 8.3.17.0 Supported on M I/O Aggregator
Version 8.3.17.0 Supported on M I/O Aggregator
show command-history
Displays a buffered log of all commands entered by all users along with a
time stamp.