Reference Guide

Virtual Link Trunking (VLT) | 251
stack-unit iom-mode
Set the M I/O Aggregator operating mode to VLT mode.
Syntax
stack-unit <unit-number> iom-mode vlt
Parameters
Command Modes
CONFIGURATION
Command
History
Usage
Information
This command resets the operating mode to VLT. You must reboot the I/O Aggregator after using this
command.
unit-number
<0-5>
Enter the number of the member stack unit. The range is from 0 to 5. The default is 0.
vlt
Enable virtual link trunking mode.
Version 9.2(0.0) Introduced on the DELL Poweredge I/O Aggregator Switch IO Module.