Reference Guide

220 | Simple Network Management Protocol (SNMP) and Syslog
www.dell.com | support.dell.com
show logging
Displays the logging settings and system messages logged to the internal buffer of the switch.
Syntax
show logging [number | [history [reverse] [number] | reverse [number] | summary | driverlog
[stack-unit number] | kernellog [stack-unit number]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
number
(OPTIONAL) Enter the number of message to be displayed on the output.
Range: 1 to 65535
history (OPTIONAL) Enter the keyword history to view only information in the Syslog history
table.
reverse (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in,
first out) order.
summary (OPTIONAL) Enter the keyword summary to view a table showing the number of
messages per type and per slot.
driverlog (OPTIONAL) Enter the keyword driverlog to view the driverlog information per
stack-unit.
Enter the keyword
stack-unit followed by the stack member ID of the switch for which
you want to display the driver log.
Range: 0 to 1
kernellog (OPTIONAL) Enter the keyword kernellog to view the kernellog information per
stack-unit.
Enter the keyword
stack-unit followed by the stack member ID of the switch for which
you want to display the driver log.
Range: 0 to 1
Version 8.3.17.0 Supported on M I/O Aggregator