Reference Guide

190 | Layer 2
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
description
Add a description about the selected VLAN.
Syntax
description description
To remove the description from the VLAN, use the no description command.
Parameters
Defaults
none
Command Modes
INTERFACE VLAN
Command
History
Related
Commands
show cam mac stack-unit
Displays the Content Addressable Memory (CAM) size and the portions allocated for MAC addresses
and for MAC ACLs.
Syntax
show cam mac stack-unit unit_number port-set port-pipe count [vlan vlan-id] [interface interface]
Parameters
interface interface
Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
vlan vlan-id Enter the keyword vlan followed by a VLAN ID number from 1 to 4094.
Version 8.3.17.0 Supported on M I/O Aggregator
description
Enter a text string description to identify the VLAN (80 characters maximum).
Version 8.3.17.0 Supported on M I/O Aggregator
show vlan Displays VLAN configuration.
stack-unit unit_number (REQUIRED) Enter the keyword stack-unit followed by a stack member
number to select the stack unit for which to gather information.
Range: 0 to 5
port-set port-pipe (REQUIRED) Enter the keyword port-set followed by a Port-Pipe number
to select the Port-Pipe for which to gather information.
Range: 0
address mac-addr (OPTIONAL) Enter the keyword address followed by a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that MAC address.
dynamic (OPTIONAL) Enter the keyword dynamic to display only those MAC
addresses learned dynamically by the switch.
static (OPTIONAL) Enter the keyword static to display only those MAC address
specifically configured on the switch.