Reference Guide

Interfaces | 145
Example
Figure 11-15. show config Command Example for the INTERFACE Mode
show config (from INTERFACE RANGE mode)
Displays the bulk configured interfaces (group).
Syntax
show config
Command Modes
CONFIGURATION INTERFACE (conf-if-range)
Command
History
Example
Figure 11-16. show config (Bulk Configuration) Command Example
show config (from INTERFACE VLAN mode)
Displays the current configuration of the Default VLAN.
Syntax
show config
Command Modes
INTERFACE VLAN
Example
Figure 11-17. show config Command Example for the Default VLAN
Command
History
FTOS(conf-if)#show conf
!
interface TenGigabitEthernet 1/1
no ip address
switchport
no shutdown
FTOS(conf-if)#
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS(conf)#interface range tengigabitethernet 1/1 - 2
FTOS(conf-if-range-tengig-1/1-2)#show config
!
interface TenGigabitEthernet 1/1
no ip address
switchport
no shutdown
!
interface TenGigabitEthernet 1/2
no ip address
switchport
no shutdown
FTOS(conf-if-range-tengig-1/1-2)#
FTOS(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
FTOS(conf-if-vl-1)#
Version 8.3.17.0 Supported on M I/O Aggregator