Reference Guide

124 | FIP Snooping
www.dell.com | support.dell.com
show fip-snooping system
Displays information on the status of FIP snooping on the switch (enabled or disabled), including the
number of FCoE VLANs, FCFs, ENodes, and currently active sessions.
Syntax
show fip-snooping system
Command Mode
•EXEC
• EXEC Privilege
Command
History
Example
Figure 9-7. show fip-snooping system Command Example
Number of FLOGI Accepts Number of FIP FLOGI accept frames received on the interface
Number of FLOGI Rejects Number of FIP FLOGI reject frames received on the interface
Number of FDISC Accepts Number of FIP FDISC accept frames received on the interface
Number of FDISC Rejects Number of FIP FDISC reject frames received on the interface
Number of FLOGO Accepts Number of FIP FLOGO accept frames received on the interface
Number of FLOGO Rejects Number of FIP FLOGO reject frames received on the interface
Number of CVLs Number of FIP clear virtual link frames received on the
interface
Number of FCF Discovery
Timeouts
Number of FCF discovery timeouts that occurred on the
interface
Number of VN Port Session
Timeouts
Number of VN port session timeouts that occurred on the
interface
Number of Session failures due to
Hardware Config
Number of session failures due to hardware configuration that
occurred on the interface
Table 9-4. show fip-snooping statistics Command Fields Description (continued)
Field Description
Version 8.3.17.0 Supported on M I/O Aggregator
FTOS# show fip-snooping system
Global Mode : Enabled
FCOE VLAN List (Operational) : 1, 100
FCFs : 1
Enodes : 2
Sessions : 17