Reference Guide

Dynamic Host Configuration Protocol (DHCP) | 113
Parameters
Command Mode
EXEC Privilege
Default
None
Command
History
debug ip dhcp clients packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
Command Mode
EXEC Privilege
Default
None
Command
History
release dhcp interface
Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client
configuration on the interface.
Syntax
release dhcp interface type slot/port
Parameters
Command Mode
EXEC Privilege
Default
None.
interface type slot/
port
Display log messages for DHCP packets sent and received on the specified
interface.
• For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Version 8.3.17.0 Supported on M I/O Aggregator
interface type slot/
port
Display log messages for DHCP packets sent and received on the specified
interface.
• For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Version 8.3.17.0 Supported on M I/O Aggregator
interface type slot/
port
• For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port
range is 0.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.