Reference Guide

Data Center Bridging | 109
Command
History
Example
Figure 7-9. show stack-unit stack-ports ets details Command Example
show stack-unit stack-ports pfc details
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-number} pfc details
Parameters
Command Mode
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator
FTOS#show stack-unit all stack-ports all ets details
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
FTOS#
stack-unit
Enter the stack unit.
port-number
Enter the port number.
Version 8.3.17.0 Supported on the M I/O Aggregator